Motherboards

What does the SATA port on the motherboard look like?

A motherboard SATA port is a small, flat, L-shaped data connector. Learn how to spot it, tell it apart from the 15-pin power plug, and choose the right cable.

On this page
  1. Short answer
  2. What it looks like
  3. Data port vs power connector
  4. What cable you need
  5. What the port supports
  6. Shared ports
  7. Mode settings
  8. Quick checklist

Short answer

A motherboard SATA port is a small, flat, L-shaped connector, usually black or grey. It carries data only. The drive gets its power from a separate 15-pin SATA power cable that comes from the power supply.

What it looks like

  • Shape. A small socket with an L-shaped opening. The data cable plugs straight in, often at an angle.
  • Location. On many boards, the ports sit in a group along the right edge, near the chipset. Some boards place them along another edge.
  • Labels. The board prints a label next to each port, such as SATA6G_1 (ASUS), SATA3_0 (ASRock) or SATA_1 (MSI or Gigabyte). The numbering may start at 0.
  • Colour. Usually black or grey. Colour varies by brand and does not show the port’s speed.

Data port vs power connector

The data and power connectors look alike, but they differ in size:

  • Data cable. A thin, flat cable with a short 7-pin L-shaped connector at each end. It goes into the board’s SATA port and the drive’s data port.
  • Power cable. A longer 15-pin connector on a cable with several coloured wires. It comes from the power supply.

Do not push a power plug into a data port, or the other way round. Each one fits only its own socket.

What cable you need

  • Data cables come with most boards. Latching cables hold better than plain ones. Keep the length under 1 metre.
  • Power cables come with the power supply. Check that you have enough SATA power connectors for your drives.

If a connected drive still doesn’t appear, see why Windows doesn’t see a new SSD.

What the port supports

  • SATA III runs at 6 Gb/s. That is about 600 MB/s in theory, and about 550 MB/s in practice for an SSD.
  • It connects 2.5-inch SSDs, 2.5-inch and 3.5-inch hard drives, and optical drives.
  • M.2 and PCIe SSDs are much faster than SATA. M.2 is a connector shape, not a speed. An M.2 SATA drive is no faster than a 2.5-inch SATA drive.

Shared ports

Some SATA ports turn off when a certain M.2 slot is in use. The manual shows which ones. For the wider picture of shared lanes, see PCIe lane sharing.

Mode settings

The BIOS usually sets SATA to AHCI, which is the default. RAID mode needs its own drivers, so change it only if you have set up RAID.

Quick checklist

  • Look for the small L-shaped port along the board’s edge.
  • Plug in a data cable there, and a power cable from the power supply to the drive.
  • Check the manual for any ports that share lanes with M.2 slots.
  • Do not confuse a SATA port with an M.2 slot.

For the M.2 side of storage, read how to know if an M.2 drive is compatible. For the other parts on the board, read what the components on a motherboard are called.

The complete guide to motherboards

Motherboard Basics: Layout, Tiers and How to Choose
Read the guide

Keep exploring

Guides from other topics

All topics →