What a motherboard does
The motherboard is the main circuit board in a desktop PC. The processor, memory, graphics card, storage, power supply and front-panel ports all connect to it. The board decides which parts you can use and how they talk to each other, so it is a good place to start when you plan a build.
Where the main parts sit
Layouts differ from board to board, but many ATX boards follow a similar pattern:
- The CPU socket sits near the top centre, with the memory slots beside it.
- The main graphics slot (PCIe x16) sits below the socket.
- M.2 slots for SSDs sit between or near the PCIe slots, often under heatsinks.
- The chipset sits lower down, usually under a heatsink.
- SATA ports and some headers sit along the edges.
- The 24-pin ATX power plug and the 8-pin CPU power plug (EPS) sit near the edges.
- The rear I/O panel holds the USB, network, audio and video ports.
For a full list of named parts, see what the components on a motherboard are called.
How boards are tiered
There are two kinds of tiers, and it helps to know both.
Chipset tiers. The chipset sets the platform’s features. Common tiers look like this:
- AMD AM5: entry A620 and B840; mainstream B650 and B850; enthusiast X670, X670E, X870 and X870E.
- Intel: entry H610 and H810; mainstream B760 and B860; high-end Z790 and Z890.
Brand tiers. Each brand sells several lines on the same chipset. ASUS, for example, sells Prime, TUF Gaming, ROG Strix, and ROG Maximus (Intel) or ROG Crosshair (AMD) boards. MSI uses PRO, MAG, MPG and MEG. Higher lines usually add more power-delivery parts, more M.2 slots, more rear ports and extras such as built-in Wi-Fi.
A higher tier is a guide, not a promise. A pricier board does not raise frame rates on its own, and a high phase count alone does not show that a board is well built.
Prices change often. As a rough guide at the time of writing, entry boards start around $80 to $130, mainstream boards sit around $130 to $250, and enthusiast boards start near $250. Check current listings before you buy.
Which chipsets allow CPU overclocking
- AMD: the X and B chipsets allow CPU overclocking. The A-series, and the entry A620 and B840, do not.
- Intel: Z-series boards allow CPU overclocking. B-series boards allow memory overclocking.
If you do not plan to overclock, an entry or mainstream board is usually enough.
How to choose, in order
- CPU socket. The board must match the CPU’s socket and generation. Intel and AMD boards are not interchangeable. See are Intel and AMD motherboards different.
- Memory type. AM4 uses DDR4. AM5 and Intel LGA1851 use DDR5 only. LGA1700 boards support DDR4 or DDR5, depending on the board, but not both.
- Form factor. The board must fit your case. See motherboard form factors.
- Storage and expansion. Count the M.2 slots, PCIe slots and SATA ports you need. Check the manual if you plan to use several at once, because some slots share lanes. See PCIe lane sharing and how to know if an M.2 drive is compatible.
- Connectivity. 2.5 GbE wired networking is now common on mid-range boards. Wi-Fi can be built in or added later. See built-in vs add-in Wi-Fi.
- Power delivery and cooling. Look at the VRM heatsinks and the board’s reviews, then the extras.
A newer CPU on an existing socket may need a BIOS update before it will boot. Check the board’s CPU support list before you buy.
Useful extras to look for
- BIOS update without a CPU. Some boards can update the BIOS with no CPU or memory installed. Brands use different names for this, such as BIOS Flashback or Q-Flash Plus.
- Debug display or LEDs. A POST-code display or debug LEDs help when a build does not start.
- Clear-CMOS button. This resets the BIOS settings without opening the case.
Memory slot tip
When you use two memory sticks in a four-slot board, most boards want them in the second and fourth slots from the CPU (often labelled A2 and B2). Confirm this in the manual.
Safety basics
Unplug the power supply before you touch the board. Ground yourself by touching bare metal on the case, then hold the board by its edges. Work on the box or an anti-static mat.
Where to go next
- Motherboard form factors: ATX, Micro-ATX, Mini-ITX and E-ATX sizes.
- Motherboard model names: what the letters in a board name mean.
- AMD motherboard chipsets: AM4 and AM5 tiers.
- AM4 or AM5: which AMD platform suits your budget.
- Installing a CPU: safe seating without bent pins.