A desktop cooling system moves heat out of your case so your CPU and graphics card can keep their speeds under load. Most of the decisions come down to three things: which type of CPU cooler you use, how air moves through the case, and how the fans and pumps connect to the motherboard. This guide gives you the overview. Each section links to a deeper article in this series.
What a desktop cooling system has to do
The CPU and graphics card make most of the heat in a desktop. When a chip reaches its temperature limit, it slows itself down to protect itself, which is called throttling. A cooler draws heat off the chip and hands it to the air or to a liquid. Case fans then move that warm air out of the case.
Other parts need airflow too. The power-delivery circuitry on the motherboard, called the VRM, can get hot under a demanding CPU load, and M.2 SSDs and hard drives produce heat as well. See VRM heatsinks, hard drive temperatures and cooling and whether an SSD needs a heatsink for those parts.
The three CPU cooling types
Most desktop CPU cooling comes down to three designs:
| Air cooler | AIO liquid cooler | Custom loop | |
|---|---|---|---|
| How it works | Metal fins and heat pipes with a fan | Sealed pump block, tubes and radiator, with fans | Separate pump, reservoir, water blocks, radiators and fittings |
| Setup | Mounts on the socket; simplest | Mount the pump block and radiator; moderate | Plan the whole loop; hardest |
| Upkeep | Dust cleaning | Mostly none, though pumps can get noisy with age | Regular coolant changes and checks |
| Main limit | Cooler height in the case | Radiator size and mounting spots | Time, parts cost and leak risk |
Each type can cool a modern CPU well when it is sized and installed correctly. Choose by what fits your case, what you are willing to maintain, and how quiet you want the system to be.
Air coolers
An air cooler moves heat from the CPU through heat pipes into a stack of fins, and a fan blows air through the fins. Air coolers are the simplest to install and have the fewest parts that can fail.
Height is the main fit question. Many mid-tower cases allow a cooler up to roughly 160 to 170 mm, but this varies, so check both the case and the cooler specifications. Large dual-tower air coolers can perform in a similar range to a 240 mm AIO, depending on the test and fan speed.
Some air coolers also blow air over the motherboard’s VRMs. An AIO or custom loop doesn’t do that by itself, which matters on some boards. Some AIO kits include a small fan for the VRM area.
AIO liquid coolers
An AIO is a factory-sealed loop. A pump block sits on the CPU, tubes carry coolant to a radiator, and fans move air through the radiator. You don’t refill or service it.
- Radiator sizes: common sizes are 120, 240, 280 and 360 mm, with 420 mm for some larger systems. AIO radiators are typically 27 to 30 mm thick.
- Mounting: the radiator can go on top of the case as an exhaust or at the front as an intake. Either can work. The pump must never be the highest point of the loop, because air collects there.
- Pump connection: connect the pump to the motherboard’s AIO_PUMP or CPU_FAN header. Set it to full speed, or to the setting the maker recommends. Never put it on a fan curve that can drop to zero.
- Lifespan: AIOs are often rated for around 5 to 7 years, and warranties commonly run 5 to 6 years, depending on the brand. Coolant slowly permeates through the tubing over time, so older units tend to gurgle more.
For the step-by-step install, see how to install an AIO liquid cooler. If yours gurgles or buzzes, see AIO pump noise.
Custom loops
A custom loop is built from separate parts: a pump, a reservoir, water blocks for the CPU and GPU, radiators, fittings, tubing and coolant. Loops are the most flexible option and the most work. You plan the layout, leak-test before you run the PC, and change the coolant on a schedule. Many builders change it roughly every 6 to 12 months, and some coolants need service more often.
Read custom water cooling before you buy parts. It covers tubing choice, radiator sizing and leak testing.
Radiator and fan sizing
Radiator size follows the fan size and count. Common fan sizes are 80, 92, 120, 140 and 200 mm, and radiators come in matching sizes such as 120, 240, 280, 360 and 420 mm.
A rough planning rule is about 120 mm of radiator for every 100 W of heat. Treat it as an estimate, not a guarantee, because radiator thickness and fan speed both change the result. For example, a 250 W CPU and a 350 W GPU add up to about 600 W, which points to around two 360 mm radiators if you want quiet operation.
Power limits explain why cooling matters on high-end parts. Intel lists a maximum turbo power of 253 W for the Core i9-14900K, and AMD lists a package power limit of 230 W for the Ryzen 9 7950X. Actual draw depends on the workload and board settings.
Fan headers and control
Motherboard fan headers have names such as CPU_FAN, CPU_OPT, AIO_PUMP (or W_PUMP), and SYS_FAN or CHA_FAN. The names vary by brand, so check your manual.
- 4-pin fans use PWM control. The board sends a pulse-width signal that sets the speed.
- 3-pin fans use voltage control. The board varies the voltage to change the speed.
- Current limits: a standard fan header is typically rated around 1 A (about 12 W). Pump headers are often rated higher, around 2 to 3 A, so don’t assume a pump and a fan header are interchangeable.
- RPM reporting: many BIOSes show a “CPU fan error” at boot if nothing reports RPM on CPU_FAN, so connect a fan that reports its speed there.
For mixing 3-pin fans with 4-pin headers, see 3-pin CPU fan on a 4-pin motherboard. For curve settings, see how to set a fan curve.
Case airflow
A cooler can only remove heat that the case can exhaust. A common starting layout uses front and bottom intakes, rear and top exhaust, and filters on every intake. It’s a good default for most cases.
Whether the case runs slightly positive or slightly negative matters less than the total airflow through it. See positive vs negative case pressure for how to choose. Count the airflow you actually get, not the number of fans. Filters, radiators and solid front panels can cut intake airflow a lot.
Common misconceptions
- Liquid cooling is always better than air. Some high-end air coolers perform close to a 240 mm AIO. Liquid mainly helps with space and very high-power CPUs.
- More fans always means lower temperatures. The airflow path matters more than the fan count.
- A Ryzen at 90 to 95 °C means it is failing. Ryzen 7000 and 9000 series chips are designed to boost until they reach about 95 °C.
- An AIO never needs attention. Sealed doesn’t mean permanent. Pumps can wear, and coolant slowly permeates the tubing.
Safety basics
- Power off, switch off the PSU and unplug the computer before you touch any cooling hardware.
- Use only the screws that come with your cooler, and don’t overtighten them.
- If you build a custom loop, leak-test it before you power the full system.
Where to go next
- Custom water cooling: tubing, radiator sizing and loop planning.
- Replacing thermal paste: kit contents and a step-by-step repaste.
- How often to change thermal paste: timing and warning signs.
- VRM heatsinks: what they do and how to check VRM temperatures.
- Hard drive temperatures and cooling: safe ranges and airflow for 3.5-inch drives.
- Does an SSD need a heatsink?: which drives benefit from one.
- What do heatsinks do?: the heat-transfer basics.
- 3-pin fans on 4-pin headers: pinout and speed control.
- Positive vs negative case pressure: choosing an airflow setup.
- How to set a fan curve: BIOS and software setup.
- AIO pump noise: gurgling, buzzing and fixes.
- How to install an AIO liquid cooler: the install, in order.