Windows 11 needs TPM 2.0, a security chip that stores encryption keys. Most modern desktop CPUs include one in firmware, called fTPM on AMD and PTT on Intel. You turn it on in the BIOS, then check it in Windows. Back up your BitLocker key before you change anything.
The short answer
Restart and enter the BIOS. Find the firmware TPM setting, usually under Security or Advanced. On AMD, look for AMD fTPM or fTPM. On Intel, look for Intel Platform Trust Technology (PTT). Set it to Enabled and save with F10. Then press Windows + R, type tpm.msc and confirm that the specification version is 2.0.
Check whether TPM 2.0 is already on
Press Windows + R, type tpm.msc and press Enter. Look for the status “The TPM is ready for use” and a specification version of 2.0.
You can also run Get-Tpm in an administrator PowerShell window.
If the version is 1.2, Windows 11 won’t accept it. Enable the 2.0 firmware option or update the BIOS.
Back up your BitLocker key first
If BitLocker is on, save your recovery key before you change TPM settings. Microsoft account users can find it at account.microsoft.com/devices/recoverykey. Print it or store it somewhere safe that isn’t the PC itself.
Then suspend BitLocker in Windows so the PC doesn’t ask for the key during the change. Clearing or resetting the TPM can lock you out of encrypted data if you don’t have the key.
Enable the firmware TPM
The setting name depends on your CPU and board:
- AMD: AMD CPU fTPM or fTPM.
- Intel: Intel Platform Trust Technology (PTT).
- Other menus: TPM, TPM 2.0, Security Chip or Trusted Computing.
Menu paths vary by board and BIOS version. These are common examples:
- ASUS, AMD: Advanced > AMD fTPM Configuration > TPM Device Selection, set to Firmware TPM.
- ASUS, Intel: Advanced > PCH-FW Configuration > PTT, set to Enable.
- MSI: Settings > Security > Trusted Computing > Security Device Support, set to Enable.
- Gigabyte: Settings > Miscellaneous > AMD CPU fTPM, or Intel Platform Trust Technology (PTT).
Save and verify
Press F10 to save and exit, then let Windows start. Open tpm.msc again and check the specification version. Resume BitLocker if you suspended it.
If you can’t find the option
- Most boards shipped or updated from mid-2021 onward have fTPM or PTT on by default. If the option is missing, the BIOS may be old.
- Update the BIOS from your board maker’s site. How to update your motherboard BIOS covers the steps.
- You don’t need to buy a discrete TPM module. Those plug into a header on the board, and the pin layout depends on the board. Not needed if fTPM or PTT is available.
- Check Microsoft’s list for Windows 11 CPU support. As a rough guide, that means Intel 8th generation and newer, and AMD Ryzen 2000 and newer. If you’re not sure which CPU you have, see how to check your PC specs.
What can go wrong
- Clearing the TPM erases the keys it stores. Resetting fTPM through a CPU swap, some BIOS updates or a key clear can trigger a BitLocker recovery prompt.
- Older AMD boards had an fTPM stutter problem that later AGESA updates fixed. A current BIOS is the safe choice.
- If BitLocker asks for a recovery key after a change, enter the key you saved earlier. Don’t guess.
Common misunderstandings
- You usually don’t need to buy a TPM module.
- TPM 1.2 doesn’t meet the Windows 11 requirement.
- Enabling TPM doesn’t slow the PC down.
- TPM and Secure Boot are separate settings. For Secure Boot, see how to enable Secure Boot in BIOS.
For the other settings to check after a build, see the BIOS settings guide.