BIOS Settings

How to update asus motherboard BIOS?

Download the .CAP file for your exact ASUS model and flash it with EZ Flash 3 from inside the BIOS. Includes FlashBack for no-CPU updates and recovery tips.

On this page
  1. The short answer
  2. Before you start
  3. Download the right file
  4. Prepare the USB drive
  5. Update with EZ Flash 3
  6. Update with USB BIOS FlashBack
  7. After the update
  8. If the screen stays black
  9. Common questions

To update an ASUS motherboard BIOS, download the file for your exact model from ASUS support. It comes as a ZIP that contains a .CAP file. Put that file on a FAT32 USB drive, then in the BIOS press F7 for Advanced Mode, open the EZ Flash 3 utility and pick the file. Don’t interrupt the update.

The short answer

Find your exact model and current BIOS version. Download the latest stable BIOS for that model from ASUS support, extract the ZIP and copy the .CAP file to a FAT32 USB drive. Restart, press Delete or F2, press F7, go to Tool > ASUS EZ Flash 3, and select the file. Keep the PC powered on until the update finishes.

Before you start

  • Find your model and version. The model is printed on the board. Press Windows + R, type msinfo32, and check BaseBoard Product and BIOS Version/Date. How to find your motherboard model covers other ways.
  • Read the release notes on the download page. Update when the new version fixes something you need, such as CPU support or a stability problem. Don’t update just because a newer number exists.
  • Skip beta builds unless you need one. Install the latest stable version directly rather than stepping through every older release.
  • Suspend BitLocker and back up the recovery key. Firmware TPM settings can reset during an update.
  • Keep power steady. Don’t unplug the PC or press the power button during the update.

Download the right file

On ASUS support, search for your model, then open Driver & Utility and choose BIOS & FIRMWARE. The download is a ZIP with a .CAP file inside. Extract it.

Windows tools such as Armoury Crate or the older AI Suite EZ Update can also update the BIOS. In-BIOS methods are safer, so use them if you can.

Prepare the USB drive

Format a small USB drive as FAT32. ASUS suggests a USB 2.0 drive, ideally 32 GB or smaller, because some boards are picky about larger or faster sticks. Copy the .CAP file to the root folder, not into a folder. EZ Flash doesn’t need the file renamed.

Update with EZ Flash 3

  1. Plug the USB drive into a rear port. The manual often recommends one.
  2. Restart the PC and press Delete (or F2 on some models) to enter the BIOS.
  3. Press F7 to open Advanced Mode.
  4. Go to Tool > ASUS EZ Flash 3 Utility.
  5. Choose the storage device, then select the .CAP file.
  6. Confirm. Don’t turn off the PC or press reset while it flashes. It will restart when it’s done.

Some boards also offer an EZ Flash option that downloads the update over a wired network. Options vary by model.

Update with USB BIOS FlashBack

FlashBack lets you update the BIOS without a CPU, RAM or GPU installed. You need the 24-pin and CPU 8-pin power connected and the PSU switched on.

  1. Run BIOSRenamer from the download to rename the file to the name your board expects. Put it in the drive root.
  2. Plug the drive into the rear port labelled BIOS/FlashBack.
  3. Press the FlashBack button for about three seconds, until the LED blinks.
  4. Wait about five to eight minutes. The LED turns off when the update is done.

If the LED stays solid or stops after a few seconds, the file name, USB format or drive is wrong. Check those before you try again.

After the update

Enter the BIOS and choose Load Optimized Defaults (F5 on ASUS). Then turn back on:

Saved profiles usually don’t carry over between BIOS versions. Resume BitLocker once you’re sure the PC starts normally.

If the screen stays black

  • A blank screen on the first boot after an update is often memory training, not a failed flash. Give it several minutes.
  • If it stays frozen, clear the CMOS using the clear CMOS button, the CLRTC pins or the battery method in your manual. CMOS battery and RTC explains each one.
  • Don’t keep flashing different files without checking the file name and format first.

Common questions

Do I need the update? Only if the new version fixes something you need. Updating won’t boost frame rates.

Can I skip versions? Some boards need an intermediate version before the latest one. Read the release notes.

For steps that apply to every brand, see how to update your motherboard BIOS. The BIOS settings guide covers the other settings to check afterwards.

The complete guide to bios settings

BIOS Settings Guide: How to Enter BIOS and What to Change
Read the guide

Keep exploring

Guides from other topics

All topics →