ErP Ready is a BIOS setting that cuts standby power when your PC is off. Turn it on if you want the lowest standby draw and your lights stay on after shutdown. Leave it off if you use Wake-on-LAN, wake the PC with a keyboard or mouse, or charge devices from USB while the PC is off. It has no effect on performance.
The short answer
Enable ErP Ready if you care about standby power and don’t rely on remote wake or USB charging while the PC is off. Leave it disabled if you do. Most DIY boards ship with it disabled.
What ErP means
ErP stands for Energy-related Products. It is an EU framework for energy efficiency, and it sets very low limits on the power a device can use in standby and off modes. For many products the off-mode limit is 0.5 W.
A motherboard meets those rules by cutting standby power to most onboard devices when the PC is off. That’s what the ErP Ready setting controls.
What ErP changes in the BIOS
When ErP is on, the board cuts 5 V standby power to most onboard devices in full shutdown (S5). Some boards also cut it in hibernate (S4). Sleep (S3) usually still works as normal.
With ErP on, these features typically stop working while the PC is off:
- Wake-on-LAN and remote power-on.
- Power-on or wake from a USB keyboard or mouse.
- Charging phones or accessories from USB ports while the PC is off.
- RGB lighting while the PC is off.
Power-on by RTC alarm or PCIe wake may also be disabled, depending on the board.
ASUS options: Disabled, Enabled (S5), Enabled (S4+S5)
- Disabled: standby power stays on. Wake and USB charging keep working.
- Enabled (S5): cuts standby power in full shutdown.
- Enabled (S4+S5): also cuts it in hibernate.
Some ASUS users report that S5 changes whether the PC powers on by itself after a power cut. If you rely on that, test it before you commit to a setting.
When to enable it
- You want the lowest standby draw.
- Your lights or USB devices stay lit after shutdown and you’d rather they didn’t.
- You don’t use Wake-on-LAN, keyboard or mouse wake, or USB charging while the PC is off.
When to leave it off
- You use Wake-on-LAN or remote power-on.
- You power the PC on with a keyboard or mouse.
- You charge phones or accessories from the PC’s USB ports while it is off.
- You use BIOS FlashBack on your board. Some boards need standby power for it. Check your manual before you enable ErP.
How to change it
- ASUS: Advanced > APM Configuration > ErP Ready. Press F7 first if you’re in EZ Mode.
- MSI: Settings > Advanced > Power Management Setup > ErP Ready.
- Gigabyte: Settings > Platform Power > ErP.
- ASRock: under the advanced ACPI or power settings. Names vary by board.
Save with F10.
Does it affect performance or your bill?
It has no effect on gaming or CPU performance. It also doesn’t change temperatures.
The savings are small. Standby draw is a few watts at most, so the difference is usually a few kWh a year, depending on how long the PC is off. It won’t make a noticeable difference to your bill.
Problems people report
- Boot delay or several power-button presses. Some users report slower starts or needing to press the button more than once. If this happens, turn ErP off.
- Lights still on. Not every board turns off every light. Check the setting, then your board’s LED options.
- Power-on after a power cut. Some ASUS users report that S5 changes this behaviour. See the ASUS options above.
- Wake-on-LAN stops working. This is expected, because ErP cuts the standby power that Wake-on-LAN needs.
For other settings to check after a build, see the BIOS settings guide. ErP is a different setting from ASUS Performance Enhancement, which controls CPU power limits, so don’t confuse the two. If you need to update the BIOS to get a feature working, how to update asus motherboard BIOS explains the steps.