Resizable BAR lets the CPU access all of the graphics card’s video memory at once, rather than in small chunks. AMD brands this feature as Smart Access Memory (SAM). To use it, your CPU, motherboard, GPU, BIOS and driver all need to support it. On an ASUS board, you turn it on in the BIOS with Above 4G Decoding and Re-Size BAR Support.
The short answer
Check your CPU, board, GPU and Windows version against the list below. For the slot and power side, see graphics card and motherboard compatibility. Update the motherboard BIOS and GPU driver if needed. In the BIOS, turn off CSM, enable Above 4G Decoding, and set Re-Size BAR Support to Enabled or Auto. Save with F10. Then check the status in GPU-Z or the NVIDIA or AMD control panel.
What Resizable BAR and SAM are
Resizable BAR is a PCIe feature. Without it, the CPU can usually reach only a 256 MB window of GPU memory at a time. With it, the CPU can reach the full memory space.
Smart Access Memory is AMD’s name for the same feature. It isn’t limited to AMD systems: AMD CPUs with NVIDIA GPUs, and Intel CPUs with AMD or Intel GPUs, can also use it when all the other requirements are met.
Gains vary. In many games you won’t see a change. In some games, performance can drop slightly.
Requirements checklist
- CPU: AMD Ryzen 3000 (except the 3200G and 3400G), 5000, 7000 and 9000 series. For Intel, 10th generation on selected 400-series boards, and 11th generation and newer on 500-, 600-, 700- and 800-series boards.
- Motherboard: AMD 400-, 500-, 600- or 800-series boards with a recent BIOS. Some 300-series boards support it too, depending on the model.
- GPU: NVIDIA RTX 30, 40 and 50 series, AMD RX 6000 and newer (RX 5000 support varies), or Intel Arc. Early RTX 30 cards may need a vBIOS update.
- Windows: Windows 10 version 2004 or newer, or Windows 11, with a current GPU driver.
- System: UEFI boot, CSM disabled, a GPT system disk and Above 4G Decoding enabled.
Enable it on an ASUS motherboard
On some ASUS boards, the Resizable BAR option appears on the EZ Mode screen. You can toggle it there.
In Advanced Mode (press F7), go to Advanced > PCI Subsystem Settings (or PCIe Subsystem Settings on some boards). Set Above 4G Decoding to Enabled, then set Re-Size BAR Support to Enabled, or Auto if it’s listed. Menu names vary by board and BIOS version.
Press F10 to save and restart.
Many newer AM5 and Intel 700-series BIOS versions turn it on by default, so check before you change anything.
Turn off CSM and check the disk
In the BIOS, go to Boot > CSM and set Launch CSM to Disabled. Set the boot mode to Windows UEFI.
If your Windows disk is still MBR, turning off CSM stops it from booting. Convert it to GPT first. The steps are in how to enable Secure Boot in BIOS, which covers the same conversion.
Verify that it’s active
- GPU-Z: Check the Resizable BAR field. On some systems you need to run GPU-Z as administrator.
- NVIDIA: Open the NVIDIA Control Panel, go to Help > System Information, and look for Resizable BAR set to Yes.
- AMD: Open AMD Adrenalin and check the Smart Access Memory setting.
What gains to expect
Typical gains are around 0 to 10%, and they depend on the game. Many titles show little or no change. A few lose performance. NVIDIA also enables it per game through driver profiles, so it can be on in the BIOS and still not apply in every title.
Test it in the games you play. Don’t expect a large frame-rate jump everywhere.
Troubleshooting
- Option missing: Update the motherboard BIOS. Older GPUs may also need a vBIOS update. See how to update asus motherboard BIOS.
- Shows off after you enable it: Check that CSM is off, the disk is GPT, and Above 4G Decoding is still on. Some BIOS updates reset these settings.
- Boot or stability problems: Enabling it on unsupported or older cards can cause boot or stability problems. Turn it off in the BIOS to recover.
- Driver issues: Install the latest GPU driver, then check the status again.
For the other settings to check after a build, see the BIOS settings guide.