RGB Lighting

How to control RGB on an ASUS motherboard?

Control RGB on an ASUS motherboard with Aura Sync in Armoury Crate: which header to use, how to set effects, and how to keep lights off at shutdown.

On this page
  1. Quick answer: use Armoury Crate
  2. What ASUS calls its lighting system
  3. Connect devices to the right ASUS header
  4. Install Armoury Crate and open Aura Sync
  5. Choose effects and sync settings
  6. Set the LED count on Gen 1 headers
  7. Lights that stay on after shutdown
  8. When Armoury Crate won’t work
  9. Third-party options

Quick answer: use Armoury Crate

On current ASUS boards, you control RGB with Armoury Crate, using its Aura Sync module. Connect your RGB devices to the board’s Aura headers, install Armoury Crate, then pick your colours and effects in Aura Sync. Settings are saved to the board, so the lights keep their settings after you close the software.

What ASUS calls its lighting system

ASUS’s lighting system is Aura Sync. Its current software is Armoury Crate, which includes Aura Sync as a module. Aura Creator adds advanced and layered effects, if your version includes it.

Older boards used a standalone “AURA” or “Aura Sync” app. That app is legacy, so use Armoury Crate on current boards.

Connect devices to the right ASUS header

  • AURA RGB_HEADER (12V, 4-pin): for 12V RGB strips and fans.
  • ADD_GEN2 (5V ARGB, 3-pin): for addressable devices.
  • ADD_HEADER: the older Gen 1 ARGB header on some boards.

Check your manual for the limits on your board. ASUS often quotes 3A (36W) for a 12V header and 3A (15W) for a 5V ARGB header.

Power the PC off and switch off the PSU before you connect anything. ADD_GEN2 and RGB_HEADER are not interchangeable, because they are 5V and 12V. Check the plug and the header label before you push it in.

Install Armoury Crate and open Aura Sync

  1. Download Armoury Crate from ASUS’s support page for your board.
  2. Some BIOS versions offer “Download & Install ARMOURY CRATE app” in the Tool or Advanced menu. You can turn this option off if you don’t want it.
  3. Open Armoury Crate, go to the Device section, and open Aura Sync. Menu names change between versions.
  4. Choose Sync to control all compatible devices together, or set each device on its own. Then open Aura Effects to pick an effect.

Choose effects and sync settings

Basic modes include static, breathing, colour cycle, rainbow, strobe, music, smart (temperature-based) and off.

RAM, graphics cards and fans marked “Aura Ready” or “Aura Sync compatible” can join the sync. Compatibility varies by product, so check the listing before you buy.

Set the LED count on Gen 1 headers

Gen 2 ARGB headers detect the LED count automatically. Gen 1 headers may need the LED count set by hand. Set the count to match the total number of LEDs in the chain. If the count is too low, only part of the chain lights up. For the LED limits themselves, see how many ARGB lights you can daisy chain.

Lights that stay on after shutdown

Software can’t turn off standby LEDs when the PC is switched off. Use the BIOS for that:

  • Go to Advanced, then Onboard Devices Configuration, then RGB LED Lighting.
  • Set the options for the working state, and separately for sleep, hibernate or soft off.

Menu names vary by BIOS version. To cut standby power entirely, use the ErP setting. It can also stop USB charging and wake-on-LAN while the PC is off.

When Armoury Crate won’t work

  • Run a clean reinstall. ASUS offers the Armoury Crate Uninstall Tool for this.
  • Run one RGB app at a time. Close other lighting software before you test.
  • Update the BIOS and device firmware before you troubleshoot detection. Follow ASUS’s instructions for each update, as covered in how to update an ASUS motherboard BIOS.

If devices still don’t show up, the RGB troubleshooting guide covers the hardware checks.

Third-party options

OpenRGB and SignalRGB support some ASUS boards, but support varies by board and device. If you switch to one of them, turn off Aura control in Armoury Crate so the two don’t fight over the lights.

For the header types in more detail, see ARGB and RGB headers. For devices from different brands, see syncing RGB across brands.

The complete guide to rgb lighting

ARGB and RGB Headers: How to Connect PC Lighting
Read the guide

Keep exploring

Guides from other topics

All topics →