RGB Lighting

ASRock Polychrome RGB: Controlling Motherboard LEDs

How to control ASRock motherboard LEDs with Polychrome SYNC: finding your exact board model, installing the utility, header types, and turning LEDs off.

On this page
  1. What ASRock calls its RGB system
  2. Find your exact motherboard model first
  3. Install the Polychrome SYNC utility
  4. Header names and voltages
  5. Onboard zones, headers and effects
  6. Sync with RAM, fans and coolers
  7. Turn LEDs off at startup and shutdown
  8. When the utility shows no devices
  9. Case lights the board can’t control
  10. Third-party option: OpenRGB

What ASRock calls its RGB system

ASRock’s lighting system is Polychrome SYNC, also written as Polychrome RGB. Older boards may use the name “ASRock RGB LED”. The control software is a standalone utility, usually called ASRock Polychrome RGB or Polychrome SYNC. It is not part of ASUS Aura or MSI Mystic Light, which are other brands’ apps.

Find your exact motherboard model first

Lighting software is specific to each board, so start by confirming the model. You can check it in three places:

  • The box or the receipt.
  • The model name printed on the board itself.
  • Windows: press Win+R, type msinfo32 and press Enter. Look at “BaseBoard Manufacturer” and “BaseBoard Product.”

Then download the utility from the support page for that exact model. If the support page lists revisions, match the revision as well.

Install the Polychrome SYNC utility

  1. Open the board’s support page and download the Polychrome utility for your model.
  2. Run the installer. If devices don’t show up after installing, run the utility as administrator.
  3. Older boards used the utility through App Shop, which is a legacy ASRock app.

Header names and voltages

  • ADDR_LED (5V ARGB, 3-pin): for addressable fans and strips.
  • RGB_LED (12V RGB, 4-pin): for single-colour RGB fans and strips.
  • AMD_FAN_LED: on some boards, made for AMD Wraith coolers. It may be 12V RGB, so check the manual. The Wraith cooler guide covers that cable.

Connect devices with the PC off and the PSU switched off. Match 5V devices to ADDR_LED and 12V devices to RGB_LED. For the connector basics, see ARGB and RGB headers.

Onboard zones, headers and effects

The utility can control the board’s onboard zones and each header separately, or sync them all together. Effects include static, breathing, strobe, colour cycle, random, music and wave (ARGB). Not every effect suits every device. 12V RGB devices show colour only, so per-LED effects need an ARGB device.

Sync with RAM, fans and coolers

“Sync RGB” lets compatible RAM, fans and coolers follow the board. Compatibility is set by each product, so check the product’s listing for ASRock Polychrome or Polychrome SYNC support before you buy.

Turn LEDs off at startup and shutdown

  • In Polychrome: set the zone or header to off. This works while Windows is running.
  • In the BIOS: go to Advanced, then Onboard Devices Configuration, then RGB LED (On/Off). The path varies by BIOS version.
  • At shutdown: software can’t stop standby LEDs. Turn on ErP or Deep S5 in the BIOS to cut standby power. Note that ErP can also stop USB charging and wake-on-LAN while the PC is off.

For more options on other brands, see how to turn off motherboard LEDs.

When the utility shows no devices

  1. Run the utility as administrator.
  2. Reinstall it from the board’s support page.
  3. Update the BIOS to the latest version for your board, following ASRock’s instructions.
  4. Close any other RGB apps. Two lighting apps can fight over the same devices.

If the problem continues, the RGB troubleshooting guide covers the hardware checks.

Case lights the board can’t control

Some cases have their own lighting controller, and it may not follow the board at all. If a case’s lights ignore Polychrome, check the case manual for its controller and its software. Some case controllers can’t be driven by the board. Plan the lighting around the case’s controller in that case.

Third-party option: OpenRGB

OpenRGB is a free, open-source tool that supports many ASRock boards. Support varies by model and revision, so check the OpenRGB device list before you rely on it. Only run one lighting app at a time.

For ASUS boards, see how to control RGB on an ASUS motherboard. For mixed brands, see syncing RGB across brands.

The complete guide to rgb lighting

ARGB and RGB Headers: How to Connect PC Lighting
Read the guide

Keep exploring

Guides from other topics

All topics →