Which software controls Gigabyte and AORUS lighting?
Gigabyte’s lighting system is called RGB Fusion. AORUS boards are Gigabyte’s premium line, and they use the same RGB Fusion software as the rest of the range. There is no separate “AORUS RGB” app for motherboards. AORUS Engine handles graphics cards, not motherboards.
Which app you need depends on the board’s age. Current boards use GIGABYTE Control Center (GCC), which includes RGB Fusion as a module. Older boards used App Center and a standalone RGB Fusion 2.0 app.
Current software: GIGABYTE Control Center
GCC is the main utility on current Gigabyte and AORUS boards. It checks for driver, firmware and software updates, and it manages settings such as fans and lighting. Lighting is set in the RGB Fusion module.
Download GCC from the board’s support page on the Gigabyte website. Some boards also offer to install it from a prompt during Windows setup or in the BIOS. Check the support page first, so you know which version you are getting. Then install the RGB Fusion module inside GCC.
RGB Fusion 2.0 and older utilities
RGB Fusion 2.0 is the legacy standalone app. It can run without the full GCC suite. Use it only if your board’s support page lists it, or if you are maintaining an older system. Run one lighting app at a time, because two apps controlling the same lights can conflict.
Older Gigabyte boards may also list App Center, @BIOS, System Information Viewer (SIV) and EasyTune. These handle app management, BIOS updates, system monitoring and performance tuning. They are not the lighting tool.
Find the right download for your board
Match the board model and revision before you download anything. The revision is printed on the board (for example, rev. 1.0 or 1.1) and listed on the board’s support page. BIOS files are specific to a revision, so a file for the wrong one can cause problems.
Install only what you need. Lighting requires RGB Fusion. Other tools may be needed for fan curves, pump settings, or lighting on a separate AIO cooler or graphics card.
Set up RGB Fusion in GCC
- Install GCC from the board’s support page, then install the RGB Fusion module inside it.
- Open RGB Fusion and let it detect the connected devices.
- Choose sync to control all compatible devices together, or turn sync off to set each zone on its own.
- Pick an effect and check it on the board before you move on to the next zone.
Update the BIOS or GCC only when you need to, for example when a device isn’t detected. Follow the board’s instructions for any BIOS update, as covered in how to update BIOS on a Gigabyte motherboard.
Lighting modes and zones
RGB Fusion offers static colour, pulse, flash, colour cycle, digital (ARGB) effects and per-zone control. Sync can group the board with compatible RAM, graphics cards and coolers. A device has to be on the compatibility list to sync. Gigabyte’s compatibility list changes over time, so check the product listing before you buy.
BIOS settings for startup and shutdown
Some lighting behaviour is set in the BIOS, so it works without any software. Gigabyte boards usually offer two options: “LEDs in System Power On State” and “LEDs in Sleep, Hibernation, and Soft Off States”. The menu path and names vary by BIOS version. They are often under Settings, in Miscellaneous or Peripherals.
Turning on ErP in the BIOS cuts standby power, which turns off the LEDs while the PC is shut down. ErP can also stop USB charging and wake-on-LAN while the PC is off, so only turn it on if you don’t need those features.
Devices that don’t show up
- Check the header type. D_LED is 5V addressable, and LED_C is 12V RGB. A 5V device on LED_C can be damaged, so check the connector before you test.
- Confirm the device is on the RGB Fusion compatibility list.
- Close any other lighting apps, then restart GCC.
- Update GCC, and check the board’s support page for a BIOS update that fixes the problem you see.
For a full checklist, see the RGB troubleshooting guide.
Do you need the software at all?
Not always. Settings are stored on the board, and the firmware runs default lighting without software. Uninstalling GCC does not turn the lights off. The board returns to its default lighting, which is often a rainbow pattern.
You need the software to change effects, set zones, or sync compatible devices. To turn the LEDs off completely, see how to turn off motherboard LEDs. For the header types, see ARGB and RGB headers. If you have a mix of brands, see syncing RGB across brands.