Which AMD coolers have RGB?
- Wraith Prism: AMD’s RGB stock cooler. It came bundled with several Ryzen CPUs and is also sold separately.
- Some Wraith Spire editions: a single-colour or fixed RGB ring, with little or no control.
- Wraith Stealth: no lighting.
Check your cooler model before you start. If it has no lighting, there is nothing to control.
The two Prism cables: use one
The Prism comes with two cables. Both plug into the same port on the cooler, so you can only use one at a time:
- USB cable: connects to an internal USB 2.0 header and is controlled by the Cooler Master app.
- RGB cable: connects to a 4-pin 12V RGB header on the motherboard and is controlled by the board’s lighting software.
Use one of them, not both.
Control the Prism with the Cooler Master app
Connect the USB cable to an internal USB 2.0 header, then install Cooler Master’s Wraith Prism RGB lighting control app. The app name may vary by version. It offers per-zone and per-LED effects. Close other RGB apps before you open it, because running it alongside motherboard software can cause conflicts.
Control it through the motherboard
Connect the 4-pin RGB cable to a 12V RGB header. The board’s software controls it. That is Aura Sync, Mystic Light, RGB Fusion or Polychrome, depending on your brand. The software can also sync the cooler with the rest of the build. Colour control comes from the board software, so check what your version offers.
For the header types, see ARGB and RGB headers.
AMD_FAN_LED headers on some AMD boards
Some ASRock and other AMD boards have an AMD_FAN_LED header made for the Wraith Prism’s lighting cable. It is not a general-purpose ARGB header. It may be 12V RGB, so check the board manual before you connect anything. The ASRock guide covers the ASRock header names in more detail.
Can AMD Adrenalin control these lights?
No, not for Wraith Prism lighting. AMD Adrenalin is AMD’s Radeon graphics software and is aimed at graphics cards. Use the Cooler Master app or the motherboard software to control the Prism.
Turn the lights off
- In the Cooler Master app, set the lighting to off.
- In the motherboard software, turn off the RGB header.
- Don’t rely on unplugging the cable. With no cable connected, the Prism runs its own default lighting mode, so the lights may stay on.
Fan cable vs lighting cable
The fan’s 4-pin PWM cable carries fan speed only. It doesn’t control lighting. Lighting comes from the USB cable or the RGB cable. Some people assume the fan header controls the lights, but it does not.
Safety
- Connect cables with the PC powered off and the PSU switched off.
- A 4-pin 12V RGB cable doesn’t go on a 3-pin 5V ARGB header. Don’t force it.
- Some later coolers and boxes include a 3-pin 5V ARGB cable. Check the cable before you connect it to any header.
For mixed brands, see syncing RGB across brands. If the cooler’s lights don’t respond, see the troubleshooting guide.