RGB Lighting

MSI Mystic Light: How to Control and Sync Motherboard RGB

Set up MSI Mystic Light in MSI Center, learn the JRGB and JRAINBOW headers, set effects per device, and sync compatible RAM, GPUs and coolers.

On this page
  1. Quick answer: use Mystic Light in MSI Center
  2. What Mystic Light is today
  3. MSI header names: JRGB, JRAINBOW and JCORSAIR
  4. Install Mystic Light in MSI Center
  5. Set effects per device or sync everything
  6. Sync with RAM, cards, coolers and peripherals
  7. When a device doesn’t appear
  8. BIOS settings: EZ LED Control and ErP
  9. Third-party options

Quick answer: use Mystic Light in MSI Center

Mystic Light is MSI’s lighting system. On current boards, you control it through MSI Center, where Mystic Light is an installable feature. Install it, open it, then set effects per device or sync everything together.

What Mystic Light is today

MSI Center replaced Dragon Center. Mystic Light is a feature inside MSI Center. A standalone Mystic Light app existed for older boards, and it is now legacy. If a guide tells you to use Dragon Center, it is probably out of date.

MSI header names: JRGB, JRAINBOW and JCORSAIR

  • JRGB (12V, 4-pin): for 12V RGB strips and fans. Usually rated up to 3A at 12V.
  • JRAINBOW (5V ARGB, 3-pin): for addressable devices. Usually rated 3A at 5V, and often quoted at up to 75 LEDs.
  • JCORSAIR: on some boards, for supported Corsair ARGB devices only. It can be set up in MSI Center.

These figures vary by board, so check your manual. Power the PC off and switch off the PSU before you connect anything. Check whether a header is 5V or 12V first.

Install Mystic Light in MSI Center

  1. Open MSI Center and go to Features.
  2. Install Mystic Light.
  3. Open Mystic Light to set effects.

Menu names may vary between MSI Center versions.

Set effects per device or sync everything

In Mystic Light, you can set effects for each device, or link devices into one sync group. The sync icon, which looks like a chain link, joins compatible devices: the board, RAM, MSI graphics cards, coolers and some peripherals.

Effects include static, breathing, flashing, double flashing, rainbow, colour cycle, music and off.

Sync with RAM, cards, coolers and peripherals

Mystic Light sync compatibility varies by product. Only devices on the compatibility list sync with it. Check the device’s MSI or partner listing before you buy. Products from other brands may need their own software.

When a device doesn’t appear

  • Update MSI Center and the BIOS to the latest versions. For the BIOS side, see how to update your motherboard BIOS.
  • Close other RGB apps. Running more than one can cause conflicts.
  • Reinstall the Mystic Light module in MSI Center.
  • Check the device’s listing to confirm it supports Mystic Light. Monitor RGB comes up often, but support depends on the monitor and its own software, so check that listing.

BIOS settings: EZ LED Control and ErP

The BIOS has an “EZ LED Control” toggle that turns the onboard LEDs on and off. Some boards also have a physical EZ LED switch.

Turning on ErP in the BIOS turns off LEDs while the PC is shut down. For how this differs from the software settings, see how to turn off motherboard LEDs.

Third-party options

OpenRGB and SignalRGB support many MSI boards, but support varies by board and device. Run only one lighting app at a time.

If a light won’t respond at all, the RGB troubleshooting guide walks through the checks in order. For the header types, see ARGB and RGB headers. For mixed brands, see syncing RGB across brands.

The complete guide to rgb lighting

ARGB and RGB Headers: How to Connect PC Lighting
Read the guide

Keep exploring

Guides from other topics

All topics →